SAFE Fire Detection

The SafeASD-720 aspirating smoke detector is designed for areas up to 668 square meters (7,200 square feet). Total sample pipe runs up to 82.3 meters (270 feet) using 25mm (3/4” SCH-40) pipe to draw air samples from the protected hazard back to the detector for analysis. Maximum number of sampling holes is 8 spaced no greater than 9 meters (30 feet) between sampling points. Spacing between sampling pipes must also not exceed 9 meters (30 foot) spacing.

• High Sensitivity Light Scattering Sensor
• Single Zone/Pipe Max. 82m(270ft.) of Pipe
• “Auto” Commissioning
• Powerful Aspirating Fan w/ Frequency Flow Supervision
• Up to 668 sq. m. Coverage
• Single Point Maintenance
• Latching/Non-Latching Fire and Fault Contacts
• “SafeCalc” Pipe Calculation Program

Download PDF Brochure

• CCD Technology provides the earliest early warning fire detection
• Immune to dust, dirt, heat, cold, humidity and other factors that typically cause False Alarms in other detectors
• Large area coverage - up to 43,200 sq. ft. with one panel
• 0.0000% to 100% obs/ft, and more sensitivity combinations than any other air sampling detector
• Drop in replacements for any air sampling detector WITHOUT sampling pipe modification
• Less maintenance, and does not require costly periodic re-calibration
  *More new features & easier to operate
• Less costly than other systems

Download PDF Brochure

Early warning fire detection is important, but how do you find the source of the alarm? The ProLocator Fire Sniffer is the world's ONLY portable CCD early warning fire detector that allows you to "sniff" out the source of the fire or pre-fire event. The ProLocator Fire Sniffer uses "Cloud Chamber Detection" (CCD) Technology that detects particles of combustion. Similar in operation to a Gieger Counter, the ProLocator Fire Sniffer directs you to the source of the fire with audible and visual indicators. Identifying the source of your early warning fire alarm has never been easier.

• Sensitivity Range: 0.0000 to 100% obs./ft.
• Power: Battery operated with charger
• Dimensions (WxHxD): 12" x 11" x 4.25"
• Weight: 12 lbs.
• Unit Operating Temperature: 32°-130°F (0-54°C)
• Location Indicator: LED and audible
• Other Indicators: Supply Health and Fault

Download PDF Brochure

SAFE Fire Detection, Inc. SafeCable Linear Heat Detection Wire offers longer operating distances and greater ease of installation over competitive linear heat detection products. It can be used with any certified fire alarm panel and SafeCable offers you savings on both the cost of the wire and the cost of installation. SafeCable is available in a variety of alarm temperatures and it carries full FM, UL and ULC certifications, among others. It's simple; a better linear heat detection wire at a better price.

SafeCable is a real breakthrough in linear heat detection wire. With a dramatically lower resistance/ft. over competitive products, SafeCable allows for runs of up to 10,000' in a single zone and the more flexible, yet rugged construction of SafeCable makes installation easier and less time consuming. SafeCable is certified by UL, ULC and FM for use with ANY FIRE DETECTION PANEL.

• Lower cost
• Up to 10,000 linear feet of SafeCable™ per zone, .05 ohms/ft resistance per twisted pair wire (Lower than any other wire)
• Compatible with ALL Fire Alarm Control/Releasing Panels (Maximum length determined by resistance allowed by panel)
• Multiple alarm temperatures: 155°F, 172°F, 190°F, 220°F, 280°F, 360°F
• Distance locating available
• Can detect anywhere along the entire length of wire
• Multiple alarm temperatures can be mixed on the same zone
• Total zone length replacement unnecessary after alarm
• Longer standard spool lengths means less splicing
• Custom lengths available
• Corrosion and UV resistant

A full assortment of mounting and splicing hardware available

Download PDF Brochure

What is Linear Water Leak Detection?

The ProH2O Module linear water leak detector operates using time-domain reflectrometry. A short pulse (less than 1 millionth of a second) is sent down the cable. When a leak is detected, a return pulse is generated (effectively the pulse sent out by the controller “bounces” off the leak) to send back an alarm.

The new ProH2O "Plug and Play" design comes in modular and distance locating versions. The cable can be run 100ft/30m max (Module) or 1000ft/300m max (Professional). The cables come in three easy to use “Plug and Twist” lengths, 12 ft (3.5m), 50 ft (15m ) or 100 ft (30 m) just use the combination that best meets your needs. ProH2O leak detection cable can be run on the floor utilizing our adhesive backed easy to use “Quick Clips” near sensitive equipment, in low areas or anywhere water may enter the environment. It can also be attached directly to sprinkler or process piping with our double loop ties to monitor for leaky pipes. The ProH2O Water Leak Detector Module operates on 12 VDC or 24VDC and has both alarm and fault connections to provide an easy interface to your Build System, Fire Alarm or Security System.

• Addressable or Conventional
• Modular or Distance Locating
• Self-Restoring
• Up to 100 ft. per detector (Modular)
• Up to 1,000 ft. per detector (Professional)
• Can detect a leak anywhere along its entire length

Download PDF Brochure